A3 T-Shirt Printing Machine — DTG & DTF Dual-System Garment Printer | GNFEI F13G3
Print
Anything.
One A3 machine. Two complete printing systems. Print directly on cotton with DTG, or create transfer films for polyester, nylon, leather — any fabric — with DTF. Switch methods in minutes.
DTG or DTF —
You Choose
The F13G3 supports both workflows. Use the method that fits your job — or both for different fabric types in the same day.
Ink fires directly into fabric fibers. No transfer film required. Best for 100% cotton, natural fibers, and same-day orders where speed matters most.
Print CMYK+white onto PET transfer film, apply hot-melt powder, then heat press onto any fabric. Works on polyester, nylon, denim, leather — anywhere DTG can't.
One Investment.
Two Revenue Streams.
The GNFEI F13G3 is an A3 dual-function printer combining DTG and DTF in one machine. Where a pure DTG printer is limited to cotton, and a pure DTF setup requires separate hardware, the F13G3 handles both — switching between methods by changing the ink config and substrate.
EPSON L805 or XP600 printhead options, 5760×1440 dpi resolution, water-cooling for long runs, and Acro RIP 10.3 colour management. The 31×43 cm vacuum platform holds garments and PET film flat for every print. CMYK+WW or CMYK+LC/LM available depending on your application.
Request Factory Price
What Comes
Off the Machine
Full-colour garment prints from the F13G3 — vivid on light and dark fabrics, photographic detail, wash-resistant results.
A3. Water-Cooled.
Dual-System.
EPSON L805 or XP600. 31×43 cm vacuum platform. CISS with white ink stirring. Automatic height adjustment up to 69 mm.
DTG & DTF In Action
Both printing methods demonstrated — direct garment and DTF transfer film from the same machine.
Built for Both Methods
Six systems that make the F13G3 production-ready for both DTG and DTF applications.
Choose your printhead — L805 for proven reliability or XP600 for higher-speed output. Both deliver up to 5760×1440 dpi with variable droplet technology for fine detail and smooth gradients.
Active water-cooling with efficient pump maintains stable printhead temperature during continuous production runs — preventing throttling and maintaining print quality all shift long.
Continuous Ink Supply with dedicated white-ink stirring keeps WW pigment suspended — critical for consistent white opacity on dark garments and DTF PET film printing.
Maximum resolution for photo-quality garment prints and fine-detail DTF transfers. Sharp text, vivid gradients, accurate skin tones — consistent across every job.
Pre-print nozzle checks and automated cleaning routines prevent banding and ensure consistent white opacity — minimising costly reprints during production.
CMYK+WW for standard DTG and DTF, or CMYK+LC/LM for extended colour gamut and improved photographic skin tones. Select your config on order.
Direct on
the Garment
In DTG mode, the F13G3 prints directly onto the garment laid flat on the vacuum platen. Ink bonds into cotton fibers — no transfer, no laminate, no peel. Load the shirt, press print, done. White ink underbase on dark shirts; no underbase on light. Ideal for same-day orders and small runs.
- Direct on 100% cotton and cotton-rich blends
- CMYK+WW — white underbase on dark garments automatically
- 31×43 cm vacuum platen — full A3 front coverage
- No minimum order — 1 shirt as profitable as 100
Transfer to
Any Fabric
In DTF mode, the F13G3 prints CMYK+white onto PET transfer film. Apply hot-melt powder, cure, then heat press onto any fabric. Polyester, nylon, denim, leather, spandex blends — all work. The transfer is stretch-safe and wash-resistant, making it perfect for sportswear and activewear.
- Prints on PET film — transfers to any fabric type
- Polyester, nylon, denim, leather, synthetic blends
- Stretch-safe and wash-resistant transfer
- Pre-cut or gang-sheet transfers for efficiency
Every Order.
Every Fabric.
The F13G3's dual capability means you say yes to every job. Cotton hoodie? DTG. Polyester sports jersey? DTF. Leather patch? DTF. Mixed-fabric order? Both methods, same machine. For print shops and POD businesses, this versatility directly translates into more revenue and fewer lost jobs.
- Switch between DTG and DTF by changing substrate and ink config
- Cover 100% of garment types a customer might request
- No minimum order — MOQ 1 piece
- Acro RIP 10.3 handles both workflows from one interface
Built for Print Businesses
From solo print-on-demand operations to multi-machine shops — the F13G3 handles the full range of garment printing work.
Take every garment job — cotton, poly, or mixed. DTG for same-day direct prints, DTF for everything else. One machine covers your entire order book.
Print individual orders as they arrive with zero setup cost. DTG for cotton, DTF for polyester variants. No inventory, no waste, no minimum runs.
Polyester and synthetic fabrics are the standard in sportswear — DTF handles all of them, stretch-safe and wash-resistant. Team kits, training wear, club merchandise.
F13G3 Full Specifications
Complete technical data for procurement and comparison.
| Parameter | Technical Details |
|---|---|
| Model Number | F13G3 |
| Machine Type | Dual-System A3 Garment Printer — DTG (Direct to Garment) + DTF (Direct to Film) |
| Printhead Options | EPSON L805 or Advanced XP600 (selectable on order) |
| Print Technology | Smart Bi-directional · Auto Nozzle Checking & Cleaning · Variable Ink Droplet · Smart Printhead Protection · Automated Tray Movement |
| Max Resolution | Up to 5760 × 1440 dpi |
| Color Configuration | CMYK + WW (White ×2) or CMYK + LC/LM (Extended Gamut) |
| Compatible Ink | Premium Textile Pigment Ink (DTG) · Standard DTF Ink (DTF) |
| Ink Consumption | ~1.5 ml / A4 text · ~4.0 ml / A4 full-color image |
| Ink Delivery | CISS with White Ink Stirring System |
| Platform / Platen | 31 × 43 cm Vacuum Platform |
| Max Print Area | 297 × 420 mm (A3) |
| Max Media Thickness | Up to 69 mm (Smart Height Sensors) |
| Print Speed | 173 seconds per A3 image |
| Cooling | Water Cooling System with Efficient Pump |
| Software | Acro RIP 10.3 or latest — Professional Color Management |
| Supported OS | Windows 7 / 8 / 10 / 11 (32-bit & 64-bit) |
| Data Interface | High-Speed USB 2.0 / 1.1 / 3.0 |
| DTG Fabrics | 100% Cotton, Cotton-rich blends, Natural fibers |
| DTF Fabrics | Polyester, Nylon, Denim, Leather, Spandex, Synthetic blends — any fabric via PET film |
| Dimensions | 80 × 58 × 60 cm (L × W × H) |
| Weight | 97 kg |
| Power | 110–240 V AC · 50/60 Hz |
| Certification | CE Certified |
| Warranty | 12-Month Warranty · Full refund if non-functional |
| Support | Lifetime Technical Support |
| Price | $1,800–$2,500 (Ex Tax · Factory Direct) |
| MOQ | 1 unit |
| Lead Time | 3–5 business days after payment |
| Shipping | FedEx / DHL / UPS / TNT · Worldwide door-to-door |
One Machine.
Every Fabric.
Factory direct from GNFEI — get a free quote on the F13G3 DTG+DTF dual printer today.
Model F13G3 · $1,800–$2,500 · DTG + DTF Dual System · CE Certified · MOQ 1 pc · Ships Worldwide